| PART |
Description |
Maker |
| MAX16126 MAX16127 |
Load-Dump/Reverse-Voltage Protection Circuits
|
Maxim Integrated Products
|
| NCV2931AST.5.0T3 NCV2931AST.5.0T3G LM2931DT.5.0 LM |
100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection
|
ON Semiconductor
|
| LM293107 LM2931CDR2 LM2931CDR2G LM2931ADT-5.0G LM2 |
100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection
|
ONSEMI[ON Semiconductor]
|
| LM2931AD-5.0R2 LM2931AD2T-5.0R4 LM2931ADT-5.0RK LM |
100mA, 5V, Low Dropout Voltage Regulator with 60V Load Dump Protection
|
ON Semiconductor
|
| MP2495 MP2495DS |
Integrated 100V Load Dump Protection, 2A Step Down Regulator with Output Current Control
|
Monolithic Power Systems
|
| TAR5025 |
50.0 AMPS. Load Dump Rectifiers
|
Taiwan Semiconductor Co., Ltd.
TSC[Taiwan Semiconductor Company, Ltd]
|
| SCP-4188 |
Load Dump Protector
|
Sensitron
|
| NCP45520 |
NCP45520 & NCP45521 Datasheet - ecoSWITCH Advanced Load Management: 11.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-13.5V, Power Good Out or Adj. Slew Rate, Adj. Discharge, & Fault Protection
|
ON Semiconductor
|
| BTS712N1 BTS712-N1 |
From old datasheet system
Smart Four Channel Highside Power Switch (Overload protection Current limitation Short-circuit protection Thermal shutdown)
Transient Voltage Suppressor Diodes
|
SIEMENS A G
SIEMENS[Siemens Semiconductor Group]
|
| FAITD25J FAITD25G FAITD250 AITD75J FAITD75J FAITD2 |
8-/16-Channel 16-Bit No Latency Delta Sigma ADC; Package: SSOP; No of Pins: 28; Temperature Range: 0°C to 70°C
Regulator; Features: Medium current output; Note: Isolation package; Comments: 60V load dump; V OUT (%): (max /-3)
Regulator; Features: Low current output; Note: Radial tape packing for automatic mounting; Comments: 60V load dump; V OUT (%): (max /-10)
Regulator; Features: Low current output; Note: Surface-mount PW-MOLD(SOT-89) package; Comments: 60V load dump; V OUT (%): (max /-10)
Photorelays (MOSFET Output Devices); Features: 1b (Normaly Close); Package: DIP4; Surface Mount Type: Y/N; Number of Pins: 4; Trigger LED Current
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.0A); Channel: 1-ch; PWM Drive: n/a; Package: SIP9; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 27V (30V); Io (lpeak): 1A (2A); Channel: 1-ch; PWM Drive: n/a; Package: HSIP10; RoHS Compatible: yes‡
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.2A); Channel: 1-ch; PWM Drive: n/a; Package: SIP9; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 20V (25V); Io (lpeak): 0.4A (1.2A); Channel: 1-ch; PWM Drive: n/a; Package: HSOP16; RoHS Compatible: yes
Brushed DC Motor Driver ICs (Bridge Drivers); Functions: Driver; Vopmax (Vm*): 18V (25V); Io (lpeak): 1A (3A); Channel: 1-ch; PWM Drive: n/a; Package: HSIP7; RoHS Compatible: yes‡
Series Regulators; Surface Mount Type: Y; Package: New PW-MOLD; Number Of Pins: 3; Polarity: Positive; General Description: Three-Terminal Voltage Regulator; Features: Medium current output; Note: Surface-mount PW-MOLD package 逻辑IC
Logic IC 逻辑IC
|
Bourns, Inc.
Thomas
|
